The Melco Jace 8000 provides connectivity to M-NET centralised controllers: AE-200E, EW-50E, AG-150A, EB-50, GB-50 to control up to 200 indoor units via either direct connection to a Niagara based system or using the or open protocols.
The Procon Melco Jace 8000 comes pre loaded with HTML5 graphics allowing easy configuration and connectivity to the Procon central controller.
The Home page displays the status and details of each Procon centralised controller.
Selecting a centralised controller will then display all the groups within. It will give the operator meaningful information such as room temp & humidity.
Selecting a group gives you a detailed view, displaying fan speed and direction, temperatures and modes. The user can adjust setpoints and the mode from a remote location and the filter reset highlights blocked filters requiring reset and engineer mobilisation.
Connecting to the station on the Melco Jace 8000 will also enable the operator to create their own wire sheet logic. This will further enhance the level of control and operability available to the user.
The alarm page gives a detailed insight into any status problems.
This interface device has been developed by Forest Rock Systems Ltd with the approval of MITSUBISHI ELECTRIC (UK). It’s use ensures validation of the CE marking, warranty and service agreement of associated Mitsubishi Electric equipment.